Our Social Media Platforms

Image for May 2018 Press release
From time to time, it is good to do a refresh of online content. We have decided our time is now.

We have been working very hard to update information across all of our channels; YouTube, Twitter, LinkedIn and Facebook. There are new videos showcasing our products and processes, new infographics explaining a little more about our capabilities and several new high definition images promoting the products we manufacture.

We actively encourage our existing customers, as well as our prospects, to take a few moments to follow us across our Social Media channels. This way you will never miss company updates, press releases, videos and several other announcements only broadcast via these platforms.

Links to all of our Social Media accounts can be found on our website homepage. We look forward to you joining us!

Transition to IATF16949:2016

NDE are delighted to announce receipt of our certification from NQA following transition to the new IATF16949:2016 (automotive), & revised ISO9001:2015 quality standards. This achievement reflects the combined input & hard work from all the NDE team to meet the demands of the automotive sector, & demonstrate risk reduction through continuous improvement.

Since 2015 when we first planned the introduction of TS16949 (automotive), we have not stopped. As customers for products and services, we all have ever increasing expectations as well as increased awareness of ethical and environmental issues. Our journey is certainly not complete. We have secured firm foundations on which to continue, and look forwards to those future development…

NQA_IATF16949_CMYK NQA_ISO9001_CMYK_UKAS

What’s New in Electronics – W.N.I.E

On 25th & 26th September 2018, NDE will be exhibiting at W.N.I.E. The 2-day event takes place at the NEC, in Birmingham.

We will be exhibiting examples of our work which include transformers, toroids, chokes, inductors, solenoids and various other custom manufactured products all of which are built to the design of the customer.

We are a BS EN ISO 9001: 2008 and TS 16949:2009 approved manufacturing facility and whether you are looking for a one-off batch or a full, ongoing production run, NDE have the capabilities to fulfill your requirements.

Come and visit us on Pod H62 and talk to our friendly team. We look forward to seeing you there!

WNIE Promo 1

Southern Manufacturing 2018 – New venue, same great show!

The UK’s largest regional manufacturing, electronics and subcontracting exhibition opened its doors again, but this time in a new venue at Farnborough International Exhibition & Conference Centre. This move was highly anticipated and then highly praised by exhibitors and visitors alike. The layout and the atmosphere inside the new venue gave the event that extra edge; it felt more professional, more organised and generally a whole lot warmer.

Once again there was plenty to keep the visitors occupied, lots to see and experience and some fantastic products and services on show. Although we didn’t sit in on any seminars ourselves, we spoke to numerous visitors who did and once again the feedback was positive. Everything seemed to fuse together perfectly, and it is great to see such an important event for the manufacturing industry gaining more and more strength year on year.

As always, we would like to say Thank You to everybody that took the time to come and see us. We really appreciate it. There are a lot of very exciting projects on the horizon and we are very excited to be a part of them.

We look forward to seeing you all again next year.

southern_manufacturing_show_featured_image

We aim to grow further

With January comes the start of another year.

2017 was a great year for NDE. We continued to invest and grow in key areas. Expanding with new machinery, new processes and a number of new engineers and production staff.

We go into 2018 looking to grow further; take on new projects and move forward existing relationships. Additional technology enables us to take on an even wider range of work and it’s this type of forward step that keeps NDE at the forefront of custom coil winding.

During this exciting time for UK manufacturing we are regularly seeing innovation of the highest level. We have been involved in a number of new projects and watched them mature from initial idea to full production. Working with you from the concept stage is where we like to start, it enables us to provide design assistance and a close working relationship from the very beginning.

Contact our team, talk through your project and see how NDE can help bring your idea to life.

New image 5

Southern Manufacturing – Stand E85

showimage

We are pleased to announce that we will be exhibiting at Southern Manufacturing on February 6th – 8th 2018. You will find us on Stand E85.

If you are looking for a custom coil winding service, please stop by and have a talk with our friendly team. NDE is a BS EN ISO 9001: 2008 and TS 16949:2009 approved manufacturing facility which can manufacture 1 to 50,000 units per week. We welcome all custom enquiries and are keen to discuss both new, and existing projects.

We look forward to seeing you all soon.

Engineering Design Show 2017

Exhibiting at EDS for the first time, we were very keen to get set-up early and make sure we were fully prepared for what, they promised, would be a day of non-stop interaction, lead generation and networking. They were not wrong.

The entire process to get set-up was painless, well organised and the staff were very helpful. The logistics team were constantly on hand to advise and assist. This enabled a speedy prep and provided easy access to and from the arena.

We would like to Thank everybody who took time to come and see us. It was a pleasure discussing all the exciting projects that are in development. We really enjoy watching ideas grow into full production, what’s even better, is being part of that journey.

Finally, Thank you to all our fellow exhibitors, existing customers and the staff at The Ricoh Arena. You all contributed to a fantastic and successful event.

We will see you next year.

DMaFwVFX4AA-Els

Engineering Design Show – Stand J42

We are only a very short time away from exhibiting within the electronics sector of the Engineering Design Show at The Ricoh Arena, Coventry, on 18th and 19th October 2017. Stand J42.

If you are looking for a custom coil winding service, please stop by and have a talk with our friendly team. NDE is a BS EN ISO 9001: 2008 and TS 16949:2009 approved manufacturing facility which can manufacture 1 to 50,000 units per week. We welcome all custom enquiries and are keen to discuss both new, and existing projects.

We look forward to seeing you all soon.

Picture1

Could NDE be the solution you have been looking for?

Research, development and prototyping:
Could NDE be the solution you have been looking for?

Working with our clients to help bring their designs to life is just one of the feathers in our manufacturing cap. The largest part of our facility focuses on full production; however, we have steadily built up a great reputation for developing projects with our sampling/prototyping service.

Our team works with you and can advise improvements on existing designs. Our enthusiasm for new projects showcases our desire to remain a leading UK Manufacturer. NDE’s dedicated R&D team will be with you every step of the way; turning your original concept into a working prototype. In addition to this, due to our production capabilities, we have the means to work beyond the prototyping and provide a full production service.

Currently, we are undergoing refurbishments within our facility. One of the major changes is providing us a new R&D workspace. Designed with innovation, new project introduction and continued prototype lead time reduction, in mind.

We welcome you to come and visit us. Meet the team, talk through your project and tour our facility. We look forward to working with you.

New image 2 BW

NDE welcomes new Engineers…

As part of our continued growth we are welcoming 2 new Engineers to NDE.

2 Mechanical Engineers will be joining our team this July; providing additional expertise, knowledge, advice and support. It’s a very exciting time for us, adding to the workforce, with this type of investment, signifies the intent of Goonvean Holdings and NDE, to always be doing everything they can to remain at the forefront of UK coil winding.

There are some very exciting projects on the horizon; we felt it was the right time to add to the workforce, to ensure we always have the capacity to seriously consider every project we are invited to work on.

In addition to this, we are also looking to recruit an Electrical Maintenance Engineer. Our coil winding facility is in Braunton, North Devon. It is a full-time, permanent position. Immediate start. A full job description can be found on our vacancies page. Here.

Chokes 6